SGI O2 R5k power supply ?

[Ulf Zimmermann]

No, it doesn't help, I don't know the pin layout and how it gets
turned on (switch is in the chassis, not the PS, simular to ATX).
Nothing happens when I press that button.

On Thu, Dec 18, 2003 at 04:41:12PM -0800, richard childers / kg6hac wrote:
> You can probably pick up a volt-ohm meter at Radio Shack for less than 
> $15, and test to see if your power supply is putting out a solid 5 and 
> 12 VDC, or not, very easily.
> 
> Hope this helps ...
> 
> -- richard
> 
> 
> Ulf Zimmermann wrote:
> 
> >Does anyone have a spare power supply I could borrow to test if
> >my power supply is bad ?
> >
> > 
> >
> 
> -- 
> 
> Richard Childers / Senior Engineer
> Daemonized Networking Services
> 945 Taraval Street, #105
> San Francisco, CA 94116 USA
> [011.]1.415.759.5571
> https://www.daemonized.com
> 
> 
> 

-- 
Regards, Ulf.

---------------------------------------------------------------------
Ulf Zimmermann, 1525 Pacific Ave., Alameda, CA-94501, #: 510-865-0204
You can find my resume at: http://seven.Alameda.net/~ulf/resume.html